Filter
Top Products
17
3.7 Wi-Fi Protect Setup (WPS)
Wi-Fi Protected Setup (WPS) is the latest wireless network technology, which makes wireless network
setup become very simple. If you have a WPS-enabled wireless access point and you want to establish
a secure connection to it, you don’t need to configure the wireless access point and set up data
encryption by yourself. All you need to do is to go to the WPS setup page of this wireless card, click the
PBC or PIN button, and then press a WPS button or enter an 8-digit code on the wireless access point
you want to establish a secure connection to.
I. Pin Input Config (PIN)
1. The PIN code of your wireless network card is an 8-digit number located at the upper-right
position of configuration utility. Remember it, and input the number to your wireless access
point as the WPS PIN code. (Refer to the user manual of your wireless access point for
instructions about how to do this.)
2. Click “Pin Input Config (PIN)” and the following message will appear on your computer.
Click “Yes” to select a specific wireless access point or click “No” to start PIN method of
WPS.