Filter
Top Products
22
Parameter
Description
Beacon Interval
This specifies the duration between beacon packets
(milliseconds). The range for the beacon period is 20-1000
milliseconds, with a typical value of 100.
DTIM Period
This determines the interval the access point will send its
broadcast traffic. Default value is 3 beacons.
Preamble
The preamble defines the length of the CRC block for
communication among the wireless stations. There are two
modes: Long and Short. High network traffic areas should use the
shorter preamble type.
Set Defaults
Click to return all settings to default values.
Apply
Confirm the settings on the “Advanced“ screen.
3.8.3 AP Statistics
You can get real-time information about the packet transmission and receiving status during wireless
communication from this screen. To recount the statistics value, click “Reset.“
3.8.4 ICS
To connect to the Internet through this SoftAP, you need to make a bridge between SoftAP and your
Internet connection. Select the Internet connection in your SoftAP host machine and click “Apply.”