Filter
Top Products
USERS GUIDE
VERSAPOINT RF WIRELESS KEYBOARD
VersaPointRF® Wireless Keyboard Users Guide
Version 1.1
P/N 90-15730 1/01
2001 © Interlink Electronics, Inc. All Rights Reserved.
Interlink Electronics, the 6 dot logo, VersaPoint and VersaPad are registered trademarks of
Interlink ELectronics, Inc. All other trademarks are the property of their respective owners.
Protected by the following U.S. and Foreign patents: 4,489,302; 5,296,837; 5,302,936; 5,659,334;
5,828,363; 5,847,639; 6,084,572; and one or more of the following International Patent Applications:
DE-4236187A1; EP-91-120226.5; and other U.S. and International patents pending.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation. This equipment has been tested and found
to comply with the limits for a CLASS B digital device, pursuant
to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the
instruction guide, may cause harmful interference to radio
communications. However, there is no guarantee that this radio
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment on
and off, the user is encouraged to try to correct the interference
by one or more of the following measures:
· Re-orient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
· Consult the dealer or an experienced radio-TV technician for
help.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the users authority
to operate the equipment. This product is equipped with shielded
cable. Extension cables, if used, must be shielded in order to
comply with the emission limits.
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Notice:
Canadian
conformance
#
Appendix D
FCC Certification