Filter
Top Products
EasyCoder PX4i User’s Guide (IPL version) 105
Appendix B — Media Specifi cations
Tickets with Gaps
⇐ a ⇒ Media Width
Maximum: 120 mm (4.72 inches)
Minimum: 25 mm (1.00 inches)
⇐ b ⇒ Copy Length
Maximum: 6,143 mm (241 inches)
provided there is a suffi cient amount of free SDRAM memory
Minimum (without LTS): 8.0 mm (0.32 inches)
Minimum (with LTS): 12.0 mm (0.47 inches)
⇐ c ⇒ LSS Detection Position
Variable, see Chapter 11.
⇐ d ⇒ Detection Slit Length
The length of the detection slit (excluding corner radii) must be mini-
mum 2.5 mm (0.10 inches) on either side of the LSS detection position
(e).
⇐ e ⇒ Detection Slit Height
Maximum: 25.0 mm (0.98 inches)
Recommended: 1.6 mm (0.06 inches)
Minimum: 1.27 mm (0.05 inches)
Opacity
Max opacity difference: 48%
Media Type Setup
• Gap
Note: Do not allow any perforation to break the edge of the
media as this may cause the media to split and jam the printer.