Filter
Top Products
Installation and Configuration
Install your printer per the instructions from the manufacturer with the printer connected directly to your computer.
Once the installation is completed and the printer driver is installed connect the printer to the Print
Server and the Print Server to your existing network as instructed on page 5 under hardware setup.
Now we need to add a port to the printer driver. Go to your Control Panels >> Printers and right-click
on your printer driver and select properties from the menu.
Go to the Details or Ports Tab and click on the ‘Add Port...’ button. In the next window select ‘Network
Print Port’ from the Other section and click the ‘OK’ button.
In the next window you will see the Print Server listed with its IP address, select it and click the ‘OK’
button. The port will be added and selected in the driver window and now you are finished and ready to
print.
2.
3.
4.
5.
6.
28
Multi-Function Printers
Not all Multi-Functions Printers are compatible with our Print Server however with the ones that are we have
noticed that a some adjustment to the printer driver may be necessary. To do this you need to go to the
properties of your printer driver by right-clicking on the driver and selecting Properties from the menu. Then
look for any setting that refers to Bi-directional printing under either the Details or Ports Tabs. If you find
anything make sure it is disabled or unchecked.