Filter
Top Products
Software Installation
1. Turn off the printer power.
2. Install protocol in Windows 2000/XP (if necessay)
Note: Although multiple protocols can be installed, it is preferred to install only one. The three most used
network protocols are IPX/SPX, TCP/IP or NetBEUI (see glossary for further information on these
protocols). TCP/IP has become the most commonly used protocol today.
Hardware Setup
1. Connect the USB cable from the USB printer to the USB port on the print server;
2. Connect one end of the CAT5 patch cable to the CAT5 port on the print server;
3. Connect the other end of the CAT5 cable to the network. This print server works with various
networks such as LAN, WAN, or Internet. It can be plugged into various type of ports, such as:
• Network switch/hub;
• Router;
• Network outlets;
Installation and Configuration
5
• Bridges, such as the HomePlug Ethernet bridge.
4. Connect the AC adapter to the print server.