Filter
Top Products
17
OSD Operation
Operation
F9 AUTO SCAN:
Pressing [F9] initiates Auto Scan, in which each computer is displayed for the amount of time set with Scan Duration under the F10 SETUP functions.
Press [Space Bar] will stop Auto Scan.
(Note: 1. As each computer is scanned, an S appears in front of the Port ID display indicates that it is being scanned. 2. If the scanning stops on an empty
port, or on a powered off computer, the monitor will turn blank, mouse and keyboard will have no effect. To recover, key in the Hot Key sequence for any
Port ID that has an active computer attached.)
F10 SETUP: (See Table on Next Page)
Pressing [F10] brings up the OSD configuration menu. To change the setting,
1.Move the Highlight Bar through the list using the Up and Down Arrow keys, then press [ENTER].
2.On the sub menu that appears, move the Highlight Bar to your choice and press [ENTER].
An icon of pointing hand indicates the current choice. The explanation of all choices is given in the table below: