Filter
Top Products
MM97743,0000321 1908SEP101/1
MM97743,0000322 1925AUG101/1
MM97743,0000323 1925AUG101/1
MM97743,0000324 1925AUG101/1
Test
To ensure that the installation of the AgLogic SSI Adapter
was successful, follow these steps:
1. Create orders in Agvance®. These orders need to be
marked as “Custom Apply” in order to be displayed
in AgLogic™
2. Validate on the AgLogic™ Schedule Page that open
orders were transferred successfully.
a. Log into AgLogic™
b. Click on the Schedule tab
c. Verify that the new orders are available on the
righthand pane and on the map
3. Review the Customer/Farm/Field tab in AgLogic™ to
ensure that information came in from Agvance®.
a. Log into AgLogic™
b. Click on the Customer/Farm/Field tab
c. Search for a Customer, Farm and/or Field
d. View results
4. View the “Integration Errors” box to see if any open
orders had errors when coming into the AgLogic™
System.
The “Integration Errors” box can be found on the
AgLogic™ Home page. If the number in this box is “0,”
there are no errors. If the number is greater than “0”
please proceed through the following steps:
a. Click on the hyperlinked number in the “Integration
Errors” box.
b. View the report describing the errors and
troubleshoot as needed.
NOTE: If you need additional information or help please
see the Additional Help section
FAQ’s
Q: If I host multiple locations within my organization on
one server, can I limit the work orders that come into the
AgLogic™ System?
A: Yes, any work order marked as “Custom Apply” from
AgVance® will come into the AgLogic™ System. Marking
any work order as “Loaded” will not send the work order
into the AgLogic™ System.
Additional Help
If you need more help in completing any of the steps,
please contact our Customer Contact Center at
888GRNSTAR or GreenStar@JohnDeere.com
For general use questions about the AgLogic™ Mobile
and Web applications, a complete help library can be
found in the upper right hand corner of any page in the
AgLogic™ web application.
Upgrade Instructions
Upgrades to the AgLogic™ SSI Adapter will be automatic
to your system. Notifications that the AgLogic™ SSI
Adapter has been updated will display in the “What’s New”
on the AgLogic™ System Home screen.
PFP11260 (08JUN11)
7
060811
PN=9