JVC 0909HHH-MW-MT2009 Computer Monitor User Manual


 
45
Troubleshooting
No sound.
No sound is output from the monitor if the dedicated speaker unit (sold
separately) is not connected. (page 05)
Press the MUTING button.
Check the amplifier connection.
When “ AMP ” is selected under “ Speaker ”, the sound is output from the
amplifier, and not from the speakers of the monitor. ( page 11)
No picture from HDMI devices.
Select the correct input on the monitor.
Use a cable marked with the HDMI logo.
Please use a High Speed HDMI
TM
Cable. High Speed HDMI
TM
Cables are
tested to carry an HD signal up to 1080p and higher. ( page 07)
No sound from HDMI devices.
Set “ Input-1 Audio ” properly. ( page 35)
Cannot control HDMI CEC devices.
Set “ Control with HDMI ” to “ On ”. ( page 34)
Some devices may not accept controls by HDMI CEC.
Cannot operate the product using the buttons on the monitor.
Set “ Front Panel Lock ” to “ Off ”. ( page 27)
Picture from a computer is strange.
Adjust the items under “ PC Setting ”. ( page 32)
The source indication stays on the display.
Turn on the selected external device and start playback.
When no signal is input, you cannot turn off the source indication.
The picture and the sound do not synchronize.
Adjust “ Lip Sync ”. ( page 25)
Adjust “ Picture Delay Time ”. ( page 23)
Colors are strange.
Adjust the items under “ Picture ”. ( page A-2)
Load one of the picture presets to discard the current settings and
apply the selected preset. ( page A-3)
No pictures displayed from an SD card/USB device.
Check whether the picture files are of the supported format.
( page 39)