Filter
Top Products
EN 7
Installing the Software
(For Windows
®
2000)
For details on the basic operation of
Windows
®
2000, refer to the instruction manual
provided with your computer or Windows
®
2000.
Preparation
Start Windows
®
2000.
● If you are running other software, close that
software. (Make sure that there are no other
application icons open on the task bar.)
1
Set the VIDEO/DSC switch to “DSC”.
2
Turn the camera’s POWER switch to “ ”.
3
Connect the camera to the computer using
the provided USB cable. (੬ pg. 5)
•The “Add New Hardware Wizard” window
will appear.
•“USB MODE” appears on the LCD panel.
4
Load the provided CD-ROM to the CD-ROM
drive.
5
Click the “Next” button.
6
Click the “Next” button.
7
Confirm that “CD-ROM drive” has been
checked, then click the “Next” button.
•When the loaded CD-ROM is not found,
click “Browse” button and select the
provided CD-ROM.
8
Click the “Next” button.
9
Click the “Finish” button.