Filter
Top Products
EN 9
Copying Image Data from the Digital
Video Camera to the Computer
For details on the basic operation of Windows
®
98/
2000/Me, refer to the instruction manual provided
with your computer or Windows
®
98/2000/Me.
Preparation
Start Windows
®
98/2000/Me.
● Insert the memory card into the camera. Make
sure in advance that the memory card contains
data which you want to copy onto the PC.
1
Set the VIDEO/DSC switch to “DSC”.
2
Turn the camera’s POWER switch to “ ”.
3
Connect the camera to the computer using
the provided USB cable. (੬ pg. 5)
•“USB MODE” appears on the LCD panel.
4
Double click on the “My Computer” icon.
•If the camera is connected to the computer
properly, the “Removable Disc” icon
appears. The “Removable Disc” icon allows
you to check the image data in the camera.
5
Double click the “Removable Disc” icon and
copy the desired files from the still image data
folder.
NOTES:
●
Always initialize a Memory Card (a
MultiMediaCard or an SD Memory Card) before
using it with the digital video camera. (For details
on the initialization procedure, refer to the digital
video camera’s manual.)
If the camera is connected to a personal computer
through the USB interface, there are circum-
stances in which it might not be possible to read
or write files.
●
When a file is being accessed from a personal
computer, the message “ACCESSING FILE” is
displayed on the LCD panel on the camera. Never
disconnect the USB cable while this message is
displayed.
●
Disconnect the USB cable and then turn the
computer off or operate the Power dial on the
camera.
● Note to Windows
®
2000/Me Users
Perform the following operation when disconnect
the USB cable.
1. Double click on the “Unplug or Eject Hard-
ware” icon displayed on the task bar.
2. Select “JVC DV CAMERA” and click the “Stop”
button on the “Unplug or Eject Hardware”
window.
3. Click the “OK” button on the “Stop a Hard-
ware device” window.