Filter
Top Products
11
English
200
120
To ensure safety, special techniques are required for installation. Do not attempt to perform the installation work
yourself.
● Temporarily fasten with four M10 bolts in the sequence of ,
,
and position
accurately and then securely tighten the four M10 bolts.
● The total weight of the projector and ceiling mount is 20.5kg.
● Install at a sufficient distance, referring to the projection distance range table on
page 6.
Ceiling mount
Mounting bolt
(M10 ✕ 4, procure separately)
INSTALLING THE CEILING MOUNT ON THE CEILING
Install the ceiling mount on the ceiling.
The M10 bolts for
ceiling installation
are to be procured
separately. Consult
your dealer.
Consult your dealer concerning
installation. This company
assumes absolutely no
responsibility if the projector
drops due to insufficient
installation strength.
1 Drill holes of the above size in the ceiling and
mounting plate.
2 Drill holes in the beam.
3 Insert the mounting bolts (M10) through the
holes and fasten the ceiling mount. Make sure
the weight is supported by the beam. Reinforce
the beam if its strength is insufficient.
1 Drill holes of the above size in the ceiling and
then drive in the anchor (M10).
2 Securely fasten the ceiling mount with a
mounting bolt (M10). Use anchors that will
support the weight of the projector and ceiling
mount.
In case of a wood ceiling
Ceiling
Beam
Mounting bolt (M10) To ceiling mount
Mounting bolt (M10) To ceiling mount
Mounting plate
Use materials that
will withstand the
weight of the
projector and the
ceiling mount.
In the case of a concrete ceiling
[ Typical Installation ]
Anchor
(M10)