JVC DLA-G10U Projector User Manual


 
14
English
Lamp
Filter
When removing the screws, always insert
the accessory hex wrench to prevent the
projector dropping suddenly.
REPLACING THE LAMP AND FILTER
Observe the following cautions when replacing the light source lamp or filter. Failure to
do so can result in personal injury or projector damage.
· Turn off the POWER button of the remote control or OPERATE button of the projector
and disconnect the power cord from the power outlet.
· Take precautions to keep the DLG-G10U/E main unit and lens away from furniture,
lamps, etc.
· Prepare a stable place to stand where you can work comfortably. When the
installation work is difficult, lower to a safe height and call a professional installer.
CAUTION
1 To replace the lamp and filter, remove 2 screws while supporting the DLA-G10U/E with the hands and then lower it gently.
2 Replace the lamp and filter. (Replace in accordance with the instructions given in the DLA-G10U/E instruction manual.)