Filter
Top Products
8
English
Do not connect the power plug to a power outlet until all preparations have been
completed.
CAUTION
Use care to prevent the top fitting from dropping during the installation work since this
could result in injury or damage.
CAUTION
1 Extend the two legs of the DLA-G10U/E by rotating.
Rotate until rotation becomes stiff and then stop to prevent damage. The other legs of
the projector do not rotate. Peel off the rubber pad adhered to one of the legs so the
embedded nut is visible.
2 Remove the 4 adjustment screws and remove the ceiling mount. Remove the 2
screws from the ceiling mount and open the mount 90 degrees. Remove 2 screws
and then detach the stopper from the front of the mount.
Screwdriver
Prepare the following tool
Leg
Top fitting
Hinge
Stopper
Rubber pad
Ceiling mount
HOW TO INSTALL
Vertical adjustment screw