JVC DT-E21L4 Computer Monitor User Manual


 
30
Computer signals (preset)
Analog RGB input (COMP./RGB terminals) and DVI input (HDMI terminal):
No. Signal name
Resolution Frequency
Scan system
Horizontal Vertical Horizontal (kHz) Vertical (Hz)
1 VGA60 640 480 31.5 59.9 Non-interlace
2 WVGA60 852 480 31.5 59.9 Non-interlace
3 SVGA60 800 600 37.9 60.3 Non-interlace
4 XGA60 1024 768 48.4 60.0 Non-interlace
5 WXGA (1280) 1280 768 47.8 60.0 Non-interlace
6 WXGA+60 1440 900 55.9 60.0 Non-interlace
7 SXGA60 1280 1024 64.0 60.0 Non-interlace
8 UXGA60 *
1
1600 1200 75.0 60.0 Non-interlace
9 WUXGA60 *
1
1920 1200 74.0 60.0 Non-interlace
10 1080/60p 1920 1080 67.5 60.0 Non-interlace
11 1080/50p 1920 1080 56.3 50.0 Non-interlace
12 US TEXT *
2,
*
5
720 400 31.5 70.1 Non-interlace
13 WXGA(1360) 1360 768 47.7 60.0 Non-interlace
14 SXGA+/60A *
3
1400 1050 64.0 60.0 Non-interlace
15 SXGA+/60B *
4
1400 1050 65.2 60.0 Non-interlace
16 MAC13
*
5
640 480 35.0 66.7 Non-interlace
17 MAC16
*
5
832 624 49.7 74.5 Non-interlace
18 MAC19
*
5
1024 768 60.2 74.9 Non-interlace
19 MAC21
*
5
1152 870 68.7 75.1 Non-interlace
*
1
No. 8 and No. 9 signals come in, thin lines will become obscured because their signal resolution is higher than the screen resolution.
*
2
The signal is recognized as VGA400/70, and the status is displayed as “VGA400/70”.
*
3
The signal is recognized as SXGA+60, and the status is displayed as “SXGA+60”.
*
4
The signal is recognized as SXGA+60*, and the status is displayed as “SXGA+60*”.
*
5
Only supports analog RGB input.
Non-preset signals may not be displayed normally even if the frequency is within the acceptable range.
When a preset signal comes in, the signal format is shown on the status display. When a non-preset signal comes in, “Out Of Range” appears.
Specification of the HDMI terminal
Connect it to the HDMI output terminal of a video device.
Pin No. Input signal Pin No. Input signal Pin No. Input signal
1 T.M.D.S Data 2+ 8 T.M.D.S Data 0 shield 15 SCL
2 T.M.D.S Data 2 shield 9 T.M.D.S Data 0– 16 SDA
3 T.M.D.S Data 2– 10 T.M.D.S Clock+ 17 DDC/CEC GND
4 T.M.D.S Data 1+ 11 T.M.D.S Clock shield 18 +5 V Power
5 T.M.D.S Data 1 shield 12 T.M.D.S Clock– 19 Hot Plug Detect
6 T.M.D.S Data 1– 13 CEC
7 T.M.D.S Data 0+ 14 Spare (not connected)
Specification of the mini D-SUB15pin terminal
Connect it to the mini D-SUB15pin output terminal of a video device.
Notice on transportation
This monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.
For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be slightly different
from actual products.
Design and specifications are subject to change without notice.
All company names and product names mentioned herein are used for identification purposes only, and may be the trademarks or
registered trademarks of their respective companies.
Pin No. Input signal
1 Red video signal
2
Green video signal or Sync on
Green signal
3 Blue video signal
4 Not connected
5 Ground
Pin No. Input signal
6 Red video signal return
7 Green video signal return
8 Blue video signal return
9 Not connected
10 Ground
11 Not connected
Pin No. Input signal
12 I2C data
13
Horizontal or Composite
synchronization signal
14 Vertical synchronization signal
15 I2C clock
Specifications (cont.)