JVC DT-V20L3D Computer Monitor User Manual


 
5
To adjust the stand height
To change the stand height, detach the stand from the monitor ( “To detach the stand” on page 4). Then,
change the position of the stand plate according to the stand height you want by choosing the screw holes to use.
Screw holes for higher position Screw holes for lower position
Stand plate
Stand plate
Stand body
Stand body
<Higher position> <Lower position>
To prevent an accidental fall
Fix the monitor to a wall by using strings.
Fixing the monitor
Attach the hook (not provided) to the VESA mounting holes on the rear panel (use the two holes on the upper
side) using M4 x 10 mm screws (not provided). Bind the hooks on the rear panel of the monitor to a wall or a pillar
using durable string.
Hook and screw (M4 x 10 mm)
(not provided)
Hook (not provided)
VESA mounting holes
The illustration of the monitor is of DT-V24L3D.
DT-V24_20L3D_EN.indd 5DT-V24_20L3D_EN.indd 5 08.5.27 5:14:52 PM08.5.27 5:14:52 PM