Filter
Top Products
21
ENGLISH
• For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed,
and may be slightly different from actual products.
• Design and specifications are subject to change without notice.
• All company names and product names mentioned herein are used for identification purposes only, and
may be the trademarks or registered trademarks of their respective companies.
Specifications
Use the Anton Bauer Dionic 90 (mount: QR DXC-M3A) external battery.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Notice on transportation
This monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.
7 General
Model name DT-V9L3D
Type Multi format LCD monitor
Screen size Type 9 wide format
Aspect ratio 15:9
LCD panel 9˝ wide, IPS-Pro
Effective screen size
Width: 195 mm
Height: 117 mm
Number of pixels displayed 800 x 480
Number of colors displayed 16.77 million
Viewing angle (TYP.) 170° (Horizontally), 170° (Vertically)
Brightness 350 cd/m
2
Contrast ratio (TYP.) 400:1
Compliant video signal format
☞ “Available signals” on page 9
Format
HD SDI: BTA S-004B, SMPTE292M
SD SDI: ITU-R BT.656: 525/625
SMPTE259M: 525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Audio output Internal speaker: 1.0 W
Operating conditions
Operating temperature: 0°C – 40°C
Operating humidity: 20 % – 80 % (non-condensing)
* Slightly variable depending on ambient conditions for installation.
Power requirements
AC 220 – 240 V, 50 Hz/60 Hz
DC 12 – 17 V
Rated current
0.25 A (AC 220 – 240 V)
1.7 A (DC 12 – 17 V)
External dimensions
(excluding protruding parts)
Width: 222.4 mm
Height: 218 mm (at the higher position), 181 mm (at the lower position),
176 mm (without stand)
Depth: 185 mm (at the higher position), 202 mm (at the lower position),
116 mm (without stand)
Weight
3.6 kg (with the stand)
2.7 kg (without the stand)
Accessories
AC power cord x 2, Power cord holder x 1, Screw x 2 (for power cord holder),
Protective filter x 1, Screw (for protective filter) x 4
7 Input/output terminals
Video
VIDEO/COMPONENT
(IN/OUT)
VBS/Y
Composite signal/analog component (Y) signal input/output:
1 line, BNC connector x 2
1 V(p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridge-
connected (auto termination)
PB, PR
Analog component (PB, PR) signal input:
1 line, BNC connector x 2
0.7 V(p-p), 75 Ω
E. AUDIO HD/SD SDI (IN 1)
Digital signal input (compatible with EMBEDDED AUDIO signals):
auto detection, 1 line, BNC connector x 1
E. AUDIO HD/SD SDI (IN 2)
E. AUDIO HD/SD SDI
(SWITCHED OUT)
Digital signal output (compatible with EMBEDDED AUDIO signals):
1 line switched out, BNC connector x 1
Audio
AUDIO (IN)
Analog audio signal input:
1 line, RCA connector x 1,
500 mV (rms), high impedance
AUDIO (MONITOR OUT) Analog audio signal output: 1 line, RCA connector x 2,
500 mV (rms)
EARPHONE
Monaural mini jack (3.5 mm in diameter) x 1
External
control
REMOTE (MAKE/
TRIGGER)
☞ “Using the MAKE/TRIGGER system” on page 16
REMOTE (RS-232C)
☞ “Using the RS-232C system” on page 17
DT-V9L3D_EN.indd 21DT-V9L3D_EN.indd 21 09.7.23 10:34:05 AM09.7.23 10:34:05 AM