Filter
Top Products
16
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
ⅥChange the remote control mode
ⅥTurn on/off the device
ⅥNavigate the menus
ⅥPlayback / Record, etc.
ⅥMute g Press “ ”
ⅥVolume g Press “ ”
ⅥSelect a surround mode g Press “ ”
z Depending on your device, some functions may not
be operable with this remote control.
Using the search code function
This function searches through the codes one by one, beginning from the
first code in the list.
1 Turn on the device manually.
2 Switch the remote control mode to a mode that matches
your device.
Press to select the mode.
3 Activate the search code function.
Hold down and until the mode indicator blinks.
4 Point the remote control at your device and press . If
there is no response, try the next code by pressing and
press again. Repeat the process until your device
turns off.
5 Press to register the code.
The code is now set. Confirm that the mode indicator goes
out.
ⅥIf your monitor’s remote control still does not work even after using the
search code function, use your device’s own remote control. Some
models of JVC devices cannot be operated with this remote control.
Button functions
DISPLAY
Display top
menu
OK
Select
Display menu
Back to
previous menu
MODE
Play
Forward
Rewind
Select a
chapter
Stop
Pause
Record
VOL
VOL
LCD
MODE
VOL
VOL
DISPLAY
TOP MENU
GD-463D10U_EN.book Page 16 Monday, June 8, 2009 4:20 PM