JVC GM-V42S Computer Monitor User Manual


 
12
VIDEO A
VIDEO
IN OUT
AUDIO
L/MONO
R
VIDEO B
AUDIO
L/MONO
R
VIDEO
IN Y/C IN
COMPONENT/RGB B
VIDEO
Y/G Pb/B Pr/R HD/Cs VD
AUDIO
L/MONO
R
AV connections
Connections (Continued)
VCR 1
(used as the playback source)
VCR 2
(used as the playback source)
DVD player, etc.
(used as the playback source)
To video output
To audio output
To video output
To audio output
To audio output
To video output
To S-video output
To HD/Cs output
To R output
To B output
To G output
To VD output
To audio output
Personal computer
(used as the playback
source)
Notes:
You can connect another VCR or Monitor to the VIDEO A OUT terminal. However, when connecting a VCR to the
VIDEO A terminals, do not connect both IN and OUT terminals to the same VCR.
When connecting a VCR to the VIDEO B terminals, you can use either the video or S-video terminals. If the both
terminals are used, S-video terminal will have priority.
When connecting another PC to the COMPONENT/RGB B terminals, set the “RGB/COMPO.” setting to “RGB”
(see page 22).
These terminals are not available for GM-V42PCE, GM-V42PCEG and GM-V42PCEB.
To use them, you need to install video input unit (IF-C42P1G), which is separately purchased.
04_13_GM_V42[E].p65 03.6.23, 4:42 PM12