JVC GM-V42S Computer Monitor User Manual


 
37
ENGLISH
STATUS DISPLAY Sets if you want the input terminal and the type of signal to be indicated on the screen just after
inputs are switched. (See page 25.)
CONTROL LOCK Sets the Monitor so that it cannot be operated with the buttons on itself. (See page 26.)
REMOTE SWITCH Set the selectable input terminals when controlling the Monitor with the external control unit (See
page 27.)
HD SIGNAL MODE Select the High-Definition (HD) signal type. (See page 27.)
WHITE BALANCE Adjusts R GAIN, G GAIN and B GAIN finely each for HIGH and LOW settings of the color
temperature. (See page 19.)
TIMER Sets the clock and the Power On/Off Timer. (See page 28.)
PIXEL SHIFT Sets a screen saver. (See page 29.)
POWER SAVE Sets the power save function. (See page 29.)
COLOR-REVERSE Use to reverse the color of the still picture to prevent its afterimage from being left on the screen.
(See page 30.)
REFRESH Use to eliminate afterimages on the screen. (See page 31.)
reset Resets the Setup Menu settings to defaults. (See page 33.)
all reset Resets the all menu settings and adjustments to defaults. (See page 33.)
HOUR METER Use to confirm the hours of use. (See page 25.)
MODEL NAME Use to confirm your model name. (See page 25.)
34_42_GM_V42[E].p65 03.6.23, 4:44 PM37