JVC GM-V42S Computer Monitor User Manual


 
32
Checking the Timer Battery
You can check the remaining time available from the timer
battery on the TIMER, COLOR-REVERSE, and REFRESH
menus.
When the battery becomes weak (BATTERY LOW)
BATTERY LOW appears on the screen.
When the battery runs out (BATTERY EMPTY)
BATTERY EMPTY appears on the screen.
The clock is reset and PRESENT TIME is shown as -- : --.
You cannot replace the battery yourself. Please consult your
dealer to replace it.
Set the clock and the timer functions (Power On/Off Timer,
Color-Reverse On/Off Timer, and Refresh On/Off Timer)
again after replacing the battery.
You can use functions other than the timer functions
without replacing the battery.
Other Convenient Functions (Continued)
VOLUME
VIDEO
DISPLAY
OFF POWER
RMC579 REMOTE CONTROL UNIT
ON
ASPECT
MUTING
MENU/EXIT
VOLUME
A
COMPO.
/(RGB B)
B RGB A
INPUT SELECT
2 / 3
5 /
5
MENU/EXIT
PRESENT TIME
POWER-ON SET
POWER-ON TIME
POWER-OFF SET
POWER-OFF TIME
reset
TIMER
ADJUST:
SELECT:
EXIT:
MENU
: 14:25
: ON
: 08:26
: ON
: 21:20
BATTERY LOW
PRESENT TIME
POWER-ON SET
POWER-ON TIME
POWER-OFF SET
POWER-OFF TIME
reset
TIMER
ADJUST:
SELECT:
EXIT:
MENU
: ––:––
: OFF
: ––:––
: OFF
: ––:––
BATTERY EMPTY
*
1
For GM-V42PCE, GM-V42PCEG and GM-V42PCEB:
REMOTE SWITCH does not appear on the menu
unless the video input unit (IF-C42P1G) is separately
purchased and installed.
MENU INPUT
MENU INPUT
MENU
2 / 3
5
5 /
Notes on the Color-Reverse/Refresh Timer
Once you set the Color-Reverse/Refresh timer, the timer
function is still activated even if you turn off the power.
If you turn on the power after the START TIME you
set, Color-Reverse/Refresh function is activated.
To cancel the function, select OFF in the menu
(pages 30 and 31).
The Color-Reverse timer is deactivated when you turn
on or off the Color-Reverse function manually.
The Refresh timer works in the same way as mentioned
above.
Select TIMER in the menu to control the functions
automatically ( pages 30 and 31).
24_33_GM_V42[E].p65 03.6.23, 4:43 PM32