JVC GV-LS2 U Webcam User Manual


 
45
Information
"CAMERA/PAN TILTER"
Configure the settings for the camera and pantilter on "CAMERA/PAN TILTER". Categorized into "CAMERA
SETTINGS" and "PAN TILTER SETTINGS".
"CAMERA SETTINGS"
Change the camera settings.
1
2
3
4
5
6
7
1
AUTO ZOOM RESET
Select "OFF" or "ON" for the function that resets the
zoom ratio automatically if no operation is performed
for 5 minutes.
2
WIND CUT
Select "OFF" or "ON" for the function that reduces
noise such as wind sounds.
3
MIC LEVEL SETTING
Select "+2", "+1", "0", "-1", or "-2" for the audio input
level of an external mic.
When the sounds are too loud, set it to a smaller
value. When the sounds are too low, set it to a larger
value.
4
MAX ZOOM RATIO
Select the zoom method and maximum ratio. The
options vary depending on the model.
Select "10X/OPTICAL", "16X/DYNAMIC", "64X/
DIGITAL", or "200X/DIGITAL".
5
ZOOM AMOUNT (ZOOM1)
Select "x1", "x2", or "x3" for the amount zoomed
when the inside button is pressed.
6
ZOOM AMOUNT (ZOOM2)
Select "x1", "x2", or "x3" for the amount zoomed
when the outside button is pressed.
7
"SAVE" button
After changing the above settings, click this button to
save the changes.
"PAN TILTER SETTINGS"
Change the pantilter settings.
1
2
3
1
AUTO RESET POSITION
Select "OFF" or "ON" for the function that resets
the camera position automatically if no operation is
performed for 5 minutes.
2
Pantilter rotation angle
ROTATE ANGLE (PAN1)
Set the value within the range of 1 to 90 degrees
for the angle rotated when the inside pan button is
pressed.
ROTATE ANGLE (PAN2)
Set the value within the range of 1 to 90 degrees
for the angle rotated when the outside pan button
is pressed.
ROTATE ANGLE (TILT1)
Set the value within the range of 1 to 70 degrees
for the angle rotated when the inside tilt button is
pressed.
ROTATE ANGLE (TILT2)
Set the value within the range of 1 to 70 degrees
for the angle rotated when the outside tilt button is
pressed.
3
"SAVE" button
After changing the above settings, click this button to
save the changes.