Filter
Top Products
Filename [HRS8700EU1a.fm]
Masterpage:Left
24
EN
Page 24 July 20, 2000 4:30 pm
RECORDING
Basic Recording
A
Load a cassette.
Insert a cassette with the record safety tab intact.
● The recorder’s power comes on automatically and the counter
is reset to “0:00:00”.
● While “– – – –” is blinking on the front display panel, the tape
will run for a few seconds to search for the tape number.
B
Choose a programme.
Press
PR +/–
or the
number keys
to select the channel
you wish to record.
C
Set the tape speed.
Press
SP/LP/EP
(
p
). Check the SP/LP/EP indicator on
the recorder’s front display panel to confirm the selected
tape speed.
● In EP mode, the recording time is extended three times.
● If you record a programme in EP mode on this recorder, it is
recommended to play back the EP-recorded tape on this
recorder.
● It is not possible to select EP mode if “COLOUR SYSTEM” is
set to “MESECAM”
. (
੬
pg. 67
)
D
Start recording.
Press and hold
7
and press
4
on the remote control, or
press
7
on the recorder.
E
Pause/Resume recording.
Press
9
. Press
4
to resume recording.
F
Stop recording.
Press
8
on the remote control or
0
on the recorder.
Then press
0
to remove the cassette.
Turn on the TV and select the video channel (or
AV mode).
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (
੬
pg. 25) or timer recording (
੬
pg. 30, 32), the
recording will resume automatically when power is restored
to the recorder unless the recorder’s memory backup has
expired.
B.E.S.T. takes place at the beginning of both the first SP and
the first LP (or EP) recording after inserting the cassette.
(
੬
pg. 29)
If “DIRECT REC” is set to “ON”, the programme that appears
on the TV screen will be recorded (
੬
pg. 65).
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab
HRS8700EU1a.fm Page 24 Thursday, July 20, 2000 4:30 PM