Filter
Top Products
4
28
Setting Menu (Continued)
Settings
z
The display position value varies with the input signal.
zThis adjustment is available for analog input signals, or for COMPONENT and HDMI-1/2 input signals when “V-Stretch” is set to
“On”.
zThis setting is available only when projecting the HDMI input.
zMasking is available only when high definition images are input.
zThis setting is not available when PC signals are input to HDMI terminal.
zThis setting is available only when projecting the component video input.
zThis setting is available only when projecting the HDMI input.
Setup > Picture Position
M Picture Position
Adjusts the horizontal/vertical position of the projected image.
Setup > HDMI Input Level
N HDMI Input Level
Configures the input level setting of the HDMI input terminal.
Standard For normal circumstances, select this setting.
Enhanced
Select this setting when the black-and-white of the projected image is unclear when
RGB video signals are input from DVI devices.
Setup > Mask
O Mask
Masks (Hides) the outer area of the projected image.
2.5% Masks 2.5 % of the screen.
5% Masks 5 % of the screen.
Off No masking.
Setup > Overscan
P Overscan
Selects whether or not to set overscan for the 4:3 video signals (NTSC, PAL, SECAM, 480i, 576i, 480p and 576p).
Off No overscan.
On Overscans the top, left, bottom and right at 2.5 % each.
Source > COMP
Q COMP
Configures the input signals of the component video input terminals.
Y Pb/Cb Pr/Cr Select this when component video signals are input.
RGB Select this when RGB video signals are input.
SCART
Select this when RGB video signals and sync signals are input from SCART plug for
European market.
Source > HDMI
R HDMI
Configures the input signals of the HDMI input terminal.
Auto Automatically configures input signals.
YCbCr(4:4:4) Select this when Y Cb Cr (4:4:4) video signals are input.
YCbCr(4:2:2) Select this when Y Cb Cr (4:2:2) video signals are input.
RGB Select this when RGB video signals are input.
DLA-HD100U_EN.book Page 28 Friday, October 12, 2007 5:14 PM