Filter
Top Products
41
ENGLISH
Getting Started Preparation Basic Operation Settings Troubleshooting Others
D Install the new lamp unit
E Tighten the screws of the lamp unit
F Attach the lamp cover
zFasten the screws with a + screwdriver.
zInsert the top part (with 2 claws) of the lamp cover into the unit.
zFasten the screws with a + screwdriver.
zUse only genuine replacement
parts for the lamp unit. Also, never
attempt to re-use an old lamp unit.
This may cause a malfunction.
zDo not touch the surface of a new
lamp. This may shorten the lamp
life and cause lamp blowout.
...............................
After Replacing the Lamp
z
Do not place the removed lamp
unit at locations reachable by
children or near combustible items.
zDispose used lamp units in the
same way as fluorescent lamps.
Follow your local community rules
for disposal.
CAUTION
MEMO
Claws
DLA-HD100U_EN.book Page 41 Friday, October 12, 2007 5:14 PM