JVC TM-H1375SU Computer Monitor User Manual


 
NTSC
VOLUME : 20
PHASE : 00
+
INPUT
SELECT
button
Items
VOLUME/SELECT button
–+
PHASE
reddish greenish
(Phase)
CHROMA
lighter deeper
(Chroma)
BRIGHT
darker brighter
(Brightness)
CONTRAST
lower higher
(Contrast)
STATUS indication
(NTSC or PAL)
00 ~ 50
–40 ~ +40
HOW TO HANDLE BASIC
OPERATIONS
BASIC OPERATION
PICTURE ADJUSTMENT
1. Press the POWER switch to turn on the power.
gON : Power turns ON. (Power indicator: lit)
GOFF : Power turns OFF. (Power indicator: unlit)
2. Press the INPUT SELECT buttons to choose input.
Select video/audio signals input to terminals on the rear
panel. The selected INPUT SELECT indicator lights in green.
3. Press the VOLUME/SELECT buttons to adjust the
speaker volume.
Press this button to display the speaker volume level on the
screen.
+ : The Built-in speaker volume is increased. (00 = 50)
– : The Built-in speaker volume is decreased. (50 = 00)
* Screen indication will disappear about 10 seconds after
operating.
1. Press select buttons corresponding to the item
you want to adjust.
The item you select is displayed on the screen.
1 PHASE ( ) : Phase control
2 CHROMA ( ) : Chroma control
3 BRIGHT ( ) : Brightness control
4 CONTRAST ( ) : Contrast control
PHASE CHROMA BRIGHT CONTRAS
T
POWER
ON
OFF
VOLUME/SELECT
+
* Screen indication will disappear about 10 seconds after operating.
About the STATUS indication
With the COLOR SYSTEM setting set
to AUTO mode, when you turn on the
power or select inputs, the colour
system indication appears for about
3 seconds on the screen while NTSC
or PAL signals are being detected.
It does not appear when receiving a
B/W signal or when no signal is input.
Refer to page 8 for more information
about COLOR SYSTEM setting and
page 9 for more information about
STATUS indication setting.
Notes:
Phase control is effective only in the
NTSC color system mode.
Chroma control is not effective when
receiving B/W or when no signal is
input. (Except when a component
signal is input.)
When CHROMA is adjusted to “–40,”
the picture becomes less colourful.
“NO EFFECT” is displayed (for about
3 seconds) when your selected
function has no effect.
2. Adjust with the VOLUME/SELECT buttons.
+
* When both VIDEO B terminals are connected (input) at the same time, the
Y/C terminal is given priority.
INPUT SELECT
B
A
VOLUME/SELECT
+
7
VIDEO B terminal
VIDEO B (Y/C) terminal
Input B
(VIDEO /
Y/C)
Terminals on the rear panel
Video signal input Audio signal input
1 Input A
VIDEO A terminal AUDIO A terminal
(VIDEO)
2
AUDIO B terminal