Filter
Top Products
EXIT
PHASE CHROMA BRIGHT CONTRAST MENU
VOLUME/SELECT
–
+
DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> MODE (SETTING)
• H. POSITION • CONTROL LOCK • ASPECT REMOTE
• V. POSITION • STATUS DISPLAY
• WHITE BALANCE • INPUT REMOTE
You can set the following set-up menu items.
1. While pressing the MENU button, press the
PHASE (
) button.
The <SET-UP MENU> screen is displayed.
* The screen automatically disappears when no operation is
performed after about 5 minutes.
2. Press the PHASE ( ) or CHROMA ( ) button
to select the desired menu item.
A selection mark (3) is put next to the selected item.
MENUPHASE
3. Press the VOLUME/SELECT buttons to set.
● For the WHITE BALANCE setting, select the CUT OFF or
DRIVE setting screen, then select the buttons (PHASE/
CHROMA/BRIGHT) corresponding to the function indicated
(R/G/B).
● Press the EXIT (MENU) button to return to the <SET-UP
MENU> screen.
Notes:
<SET-UP MENU> screen
<Front panel buttons>
1 Selection mark (3): Indicates the
menu item you select.
2 Menu item: Menu items you can
select.
3 Setting display: Indicates the
current settings (value).
4 Function display: The functions of
the front panel buttons (7 buttons
on the left) correspond to the
function displayed.
Function
Contents
displayed
∞ Forward the menu item.
5 Reverse the menu item.
– Lower the adjustment
value. (to the minimum)
+ Raise the adjustment
value. (to the maximum)
3 Forward the setting value.
2 Reverse the setting value.
EXIT
Exit the <SET-UP MENU>
screen. (release)
DRV Selects DRV adjustment.
CUTO
Selects CUT OFF
adjustment.
R Adjusts red signal level.
G Adjusts green signal level.
B Adjusts blue signal level.
DISP
Turns the ON-SCREEN
display on or off. (This
function is effective only
in the DRIVE or CUT OFF
adjustment mode.)
Front panel Function
Contents
button displayed
PHASE ( ) ∞ Forward selection mark (3)
CHROMA ( ) 5 Reverse selection mark (3)
Front panel Function
Contents
button displayed
+ Increase (to max. value)
3 Forward the setting value
CUTO Selects CUT OFF setting screen
– Decrease (to min. value)
2 Reverse the setting value
DRV Selects DRIVE setting screen
VOLUME/
SELECT (–)
VOLUME/
SELECT (+)
● Parameters for H. POSITION and V. POSITION can be set separately depending on
the video input (Input A (VIDEO) or Input B (VIDEO / Y/C)) selected by the input select
buttons on the front panel.
Select the required video input with the input select buttons on the front panel in
advance.
● WHITE BALANCE can be set individually at 6500 or 9300 for the colour temperature
value.
Set COLOR TEMP. to the value 6500 or 9300 in the <MENU> screen in advance.
Notes:
<SET-UP MENU>
‰ H. POSITION : 00
V. POSITION : 00
WHITE BALANCE
CONTROL LOCK : OFF
STATUS DISPLAY : ON
INPUT REMOTE : OFF
ASPECT REMOTE : OFF
1
2
3
4
PHASE CHROMA
VOLUME/SELECT
– +
9
H. POSITION
V. POSITION
WHITE BALANCE
CONTROL LOCK
STATUS DISPLAY
INPUT REMOTE
ASPECT REMOTE