Filter
Top Products
iLuv
TM
Stereo Docking Station for iPod V10M10_IM_EN_02022006
- 9 - www.i-Luv.com
SETUP & OPERATIONS
Charging you iPod
While your iPod is docked in the system, it recharges (until fully charged). Note that iPod Shuffle and other non-docking iPod will NOT charge.
Note: Please make sure you are using the correct insert for your iPod and that it is properly docked into i552. Failure to do so may cause
damage to your iPod.
Listening to your iPod
1. Press the MODE button to select iPod Icon “ON” mode, dock the already playing iPod. i552 will automatically turn on and you will hear
the music playing from your iPod.
(Note: If the playing song/music loudness is too low, i552 may not detect iPod in play mode. Press the PLAY/PAUSE button on i552 or
PLAY/PAUSE button on the remote control twice to play it.)
2. When iPod is docked and in the standby mode, press the PLAY/PAUSE button on i552 (or the PLAY/PAUSE Button on the remote
control) to play music.
3. Press the PLAY/PAUSE button again to pause play, and then press again to resume play.
4. Turn the VOLUME Wheel on i552 (or the Volume + and Volume - buttons on the remote control) to adjust the system volume.
5. Press the MUTE button on the remote control to mute the sound. Press the MUTE button again or Volume +/- buttons on the remote
control to restore the sound.
6. Press or Buttons on the remote control to go to the next or previous track. Press and hold it to speed forward or reverse music
search of the current track while in the play mode.
7. To turn off the unit, press the POWER button or the POWER ON/OFF button on the remote control to turn it off. iPod will continue
charging while in the dock.
Note: The remote control or function buttons on i552 will not control any function of iPod Shuffle.
Listening to a non-docking iPod or other portable audio devices
If you are using a non-docking iPod or other MP3 player or other portable audio device, you can still play it through i552 via the line-in jack.
Note: To use the line-in jack, make sure no iPod is docked in i552.
1. Plug one end of the audio patch cord (included) into the headphone or line-out jack on your device and the other end of the patch cord
into the i552 line-in jack, located on the back of the unit.