Filter
Top Products
iLuv
TM
Stereo Docking Station for iPod V10M10_IM_EN_02022006
- 10 - www.i-Luv.com
SETUP & OPERATIONS
2. Press the PLAY/PAUSE button on i552 (or PLAY/PAUSE button on the remote control.) The AUX icon will appear, indicating that i552 is
in the AU (AUX) mode.
3. Turn on and play your device.
4. Use the VOLUME wheel on i552 (or Volume + and Volume – button on the remote control) to adjust the system volume. You may need
to adjust your device volume too.
5. To turn off the unit, press the POWER OFF button (or POWER ON/OFF button on the remote control.) Please remember to turn off your
device too.
Listening to Radio
Note: Extend FM wire antenna fully for best FM reception (do not strip, alter or attach to other antennas). Move i552 around to get the best AM
reception.
1. Press the MODE button on i552 to select the radio mode. The radio frequency appears at the lower right corner of the display.
2. Press the AM/FM button on i552 (or on the remote control) to select AM or FM band.
3. Turn the TUNING/SEARCH wheel on i552 (or the or buttons on the remote control) to tune in the desired station. Press the or
buttons on the remote control again to Auto scan to the next clear station. Hold for SEEK mode.
4. Turn the VOLUME wheel on i552 (or the Volume+ and Volume- buttons on the remote control) to adjust the system volume.
5. Press the MUTE button on the remote control to turn off the sound. Press the MUTE button again or the Volume +/- buttons on the
remote control to restore the sound.
6. To turn off the unit, press the POWER button (or the POWER ON/OFF button on the remote control) to turn the device off.
Storing Preset Stations
i552 enables you to program 10 stations of FM and 10 stations of AM band.
1. Turn the TUNING/SEARCH wheel on i552 (or the or buttons on the remote control) to tune into the desired station you wish to store.
2. Press and hold the PROGRAM/PRESET button until the program indication begins to blink on the LCD screen. Release the hold on the
PROGRAM/PRESET button while the program indicator continues to blink.
3. Turn the TUNING/SEARCH wheel to the desired AM/FM frequency.
4. Press the PROGRAM/PRESET button a second time. The preset indicator will now appear on the LCD screen. The station is stored.
5. To store other stations, repeat above steps.
6. To recalling preset station, press the PRESET buttons to select the desired station.