Kenwood DDX4033BTM Computer Monitor User Manual


 
English 7
Setting the security function
You can set a security code to protect your
receiver system against theft.
Registering the security code
1 Display the security code
setting screen.
On <Top Menu>:
To clear the registered security code,
perform step
1 and press [CLR] in
<Security Code>.
2 Enter a four-digit number (1),
then confirm the entry (2).
Deletes the last entry
Cancels the setting
3 Repeat step 2 to confirm your
security code.
Now, your security code is registered.
When the unit is being reset or
disconnected from battery, you are
required to enter the security code. Enter
the correct security code, then press
[Enter].
Activating the security
function
You can activate security function to protect
your receiver system against theft.
On <Setup>:
The security indicator on the monitor
panel flashes when the vehicle ignition
is off.
To cancel, select [OFF].
EN_GET0908-001A_MX.indb 7EN_GET0908-001A_MX.indb 7 12/11/13 11:4512/11/13 11:45