Kenwood KVT-745DVD Computer Monitor User Manual


 
Setup Menu
Displaying the AV I/F 1 screen
AV I/F 1 screen
AV I /F Set Up
1
Adjusts the volume.
2
Returns to the Control screen of the previous
source.
3
Calls the Sound Effects Menu. (see page 80)
4
Calls the Setup Menu.
5
Selects a navigation system connection. ( RGB)
"RGB": Allows the Kenwood’s Navigation System
to connect via its interface cable.
"AV-IN": Allows a third-party navigation system to
connect via the AV INPUT port.
"OFF": Must be used if no navigation system is
connected. (The navigation display is
cancelled when the AV source is
switched.)
6
Sets a name to be displayed when you select a
system that is connected via the AV INPUT port.
(
VIDEO)
If you have set the navigation system connection to
"AV-IN", the display is fixed to "NAV".
7
Sets an image display of the system that is
connected via the AV INPUT port. (
Normal)
"Normal": When the image source is switched,
an image entered via the AV INPUT
port is displayed.
"AUTO": When an image signal is entered via
the AV INPUT port, this image is
displayed.
8
Displays the AV I/F 2 screen.
If is not shown,
touch or to display it.
AV I /F Set Up
9
Selects an AV source to be output at the AV
OUTPUT port. (
AV-IN)
p
Selects speakers used for voice guidance of the
navigation system. (
F-Left)
"F-Left": Uses the front left side speaker for
voice guidance.
"F-Right": Uses the front right side speaker for
voice guidance.
"F-All": Uses both front speakers for voice
guidance.
q
Adjusts the volume for voice guidance of the
navigation system. (
19)
w
Mutes the volume during voice guidance of the
navigation system. (
On)
When turned "On", the voice level drops for voice
guidance.
e
Displays the AV I/F 1 screen.
Displaying the AV I/F 2 screen
AV I/F 2 screen
Menu
AV I/F 1
Normal
VIDEO
AV -I N
NAV
AV-IN Name
AV-IN
SRC
Audio
Set Up
1
1
1
1
4
7
8
55
66
3
2
Menu
OffOn
AV-OUT
NAV Interruption
Line Mute
F-All
NAV Guide Volume Level
19
AV -I N
AV I/F 2
SRC
Audio
Set Up
10
11 11
1212
13
English
English 6968 English
AV Interface
You can set audio and visual (AV) interface parameters.
9 9