Filter
Top Products
9
GETTING STARTED
1
2
1
1
3
Turn the Power switch/ Volume control
clockwise to switch the transceiver
power ON.
A beep sounds.
Rotate the Channel selector to select
your desired channel.
When you receive an appropriate signal,
you will hear audio from the speaker.
Adjust the volume as necessary.
To make a call, press and hold the PTT
switch, then speak into the microphone
to transmit. Release the PTT switch to
receive.
The LED lights red while transmitting.
For best sound quality, speak into the
microphone in your normal voice while
holding the microphone approximately
1.5 inches (3 to 4 cm) from your lips.
TK-2200/3200 E 01-33-10 04.7.16, 1:44 PM9