Filter
Top Products
10
3
In MR Mode, press [F] then press [VFO] to transfer
the contents of the selected Memory Channel to the
VFO {page 33}.
tt
tt
t MR key
Press to enter Memory Recall Mode {page 30}. In
this mode, you can change memory channels using
the Tuning control or Mic [UP]/[DWN]. Press and
hold for 1 second while in Memory Recall Mode to
begin Memory Scan {page 42}.
Press [F], use the Tuning control to select the
desired channel, then press [MR] to reprogram the
Call Channel or a Memory Channel {page 29}.
yy
yy
y REV key
Press to switch the transmit frequency and receive
frequency when operating with an offset {page 23} or
an odd-split Memory Channel {page 28}.
Press [F] then press [REV] and rotate the Tuning
control to increase or decrease the squelch level
{page 14}.
uu
uu
u /F key
Press and hold for 1 second to lock the transceiver
keys {page 58}.
Press momentarily to access the second functions of
the transceiver keys.
DISPLAY
i
u
y
t
r
q
w
e
!1
!2
!4
!3
o
!5
!6!7
!0
q
Appears when the CTCSS function is activated {page 46}.
w
Appears when the Tone function is activated {page 24}.
e
Appears when the DCS function is activated {page 48}.
r
Appears when the repeater shift function is activated
{pages 23, 30}. (“ ” is not used on this transceiver.)
t
Appears when the Reverse function is activated {page 26}.