Filter
Top Products
29
7
The data listed below can be stored in each Memory
Channel:
retemaraP
&xelpmiS
retaepeR
tilpS-ddO
ycneuqerfevieceR
seY
seY
ycneuqerftimsnarTseY
ycneuqerfenoTseYseY
NOenoTseYseY
ycneuqerfSSCTCseYseY
NOSSCTCseYseY
edocSCDseYseY
NOSCDseYseY
noitceridtesffOseYA/N
ycneuqerftesffOseYA/N
NOesreveRseYA/N
ezispetsycneuqerFseYseY
MFdnabworraNseYseY
tfihStaeBseYseY
tuokcollennahCyromeMseYseY
emanlennahCyromeMseYseY
Yes: Can be stored in memory.
N/A: Cannot be stored in memory.
Note:
◆ Memory Channel Lockout cannot be set to the Program Scan
Memory (L0/U0 ~ L2/U2), the Priority Channel (Pr), or the
Weather Alert Channel (AL).
◆ Tone, CTCSS, and DCS are automatically turned OFF when
setting up the Weather Alert Channel (AL).
STORING SIMPLEX FREQUENCIES OR STANDARD
REPEATER FREQUENCIES
1 Press [VFO].
2 Turn the Tuning control to select your desired
frequency.
•You can also directly enter a desired frequency using
the keypad {page 13}.
3 If storing a standard repeater frequency, select the
following data:
•Offset direction {page 23}
•Tone function, if necessary {page 24}
• CTCSS/ DCS function, if necessary {pages 46, 48}
If storing a simplex frequency, you may select other
related data (CTCSS or DCS settings, etc.).
4 Press [F].
•A Memory Channel number appears and blinks.
•“
” appears if the channel contains data.