Kenwood TM-271 Network Router User Manual


 
68
14
Full Reset Method 2:
1 Press [F], [MENU] and turn the Tuning control to
select Menu No. 99 (RESET).
2 Press [MENU] and turn the Tuning control to select
“FULL”.
3 Press [MENU].
“SURE ?” appears.
Press any key other than [MENU] to cancel.
4 Press [MENU] to reset the transceiver.
•“WAIT” appears momentarily.
VFO RESET
This resets the transceiver parameters excluding the
DTMF Memory, the Memory channel contents, and the
Call channel contents. There are two methods available
for resetting the transceiver.
Note: Menu No. 7 (P.VFO) and Menu No. 10 (OFFSET) return to the
factory default values.
VFO Reset Method 1:
1 With the transceiver power OFF, press [VFO]+[ ]
(Power).
The VFO reset confirmation message appears.
2 Press [VFO].
“SURE ?” appears.
Press any key other than [VFO] to cancel.
3 Press [VFO] again to reset the transceiver.
•“WAIT” appears momentarily.
VFO Reset Method 2:
1 Press [F], [MENU] and turn the Tuning control to
select Menu No. 99 (RESET).
2 Press [MENU] and turn the Tuning control to select
“VFO”.
3 Press [MENU].
“SURE ?” appears.
Press any key other than [MENU] to cancel.
4 Press [MENU] to reset the transceiver.