Filter
Top Products
§ Upon installation of the device driver, you will notice 3 icons appear on the “My Computer”
screen. Refer the section on “Installing new hard disk on Win98SE / ME & configure new hard
disk drive in Win98SE / ME” if user do not see your hard disk drive icon.
5.3 Verify Win98SE/ ME has properly installed the device driver
q Click on the My Computer icon by
right-click on the mouse.
q Select the Properties item.
q Choose the Device Manager
selection
q Double click the Disk drives item.
q And check the three INSTEP EzII
DRIVE have installed.
q Double click the Universal serial
bus
q Controller item.
q And check the USB 2.0 EzDrive II
has installed.
5.4 Troubleshoot
§ Click on My Computer icon by right-click on the mouse.
§ Select the Properties item.
§ Choose the Device Manager selection
§ Double click the others item and check if USB 2.0 EzDrive II is mark with
§ an exclamation mark.
§ Click on the item mark with an exclamation mark and then click Remove,
§ Refresh.
§ The windows will prompt for device driver again.
User Manual
12