Filter
Top Products
6 Hardware Installation
Kingston Technology Company SSFDC™ Card Reader - Rev. A00
2. For PS/2 style keyboards, you will attach the DC power cable as
shown below. First, unplug the keyboard from your computer’s rear
panel. Plug the “AT to PS/2 adapter” directly into the keyboard
connector on your computer’s rear panel. Next, plug the end of the
power adapter cable with AT connector into the “AT to PS/2
adapter” extending from the computer’s rear panel. The opposite end
of the adapter cable with the PS/2 connector is where you must now
plug in your keyboard.
Note: When power is applied, the LED on the SSFDC
™
Card Reader
will remain constantly lit. When a PC storage card is inserted or
accessed the LED will blink.
PS/2 Keyboard Connection
PS/2 Keyboard
Configuration
Plugs into the Cable
extending from your
PS/2 Keyboard
PS/2 to AT
Keyboard Adapter
PS/2 Connector