Filter
Top Products
KND2415TX Users Guide - Rev. A00 Kingston Technology Company
Appendix E Mounting Templates 17
Appendix E Mounting Templates
The Fast EtheRx dual-speed hubs can be stationed on a at surface using the four
rubber feet provided, or mounted in a standard 19” rack by using the mounting
brackets and 4 thumb screws provided with the unit.
Rubber Feet for Desktops
The Fast EtheRx dual-speed hubs come with rubber feet that may be applied to the
bottom of the unit for desktop surface installations. The 4 rubber feet have peel-
off adhesive backing. Remove the backing and attach the feet to the bottom of the
switch.
Brackets for Rack Mounting
The Fast EtheRx dual-speed hubs can also be mounted in a standard 19” rack using
the brackets included with the unit. A rack mount installation uses a standard 19”
dimension. Align the holes in the brackets with the holes on each side of the unit.
Use the 8 screws provided to secure the brackets to the Fast EtheRx dual-speed
hub. See Figure E-1 below:
Fig. E-1 Attaching the Mounting Brackets