Kingston Technology KND810TX Switch User Manual


 
14 Appendix C Specifications
Kingston Technology Company KND2410TX User’s Guide - Rev. A01
Compliance: IEEE802.3u 100BASE-TX Standard
IEEE802.3i 10BASE-T Standard
IEEE802.3 CSMA/CD Standard
Media Interface:
KND810TX
KND1610TX
KND2410TX
8 auto-negotiating 10/100TX UTP ports
16 auto-negotiating 10/100TX UTP ports
24 auto-negotiating 10/100TX UTP ports
KND810TX KND1610TX KND2410TX
Speed Setting Dip Switches:
[Used to manually configure
the corresponding ports for
10Mbps, 100Mbps, or Auto-
negotiation (default setting)].
Ports 7 & 8 Ports 7 & 8 Ports 23 & 24
Diagnostic LEDs:
1 LED for Power Indicator (steady green)
2 LEDs for both 10Mbps and 100Mbps collision detection (flashing amber)
8, 16, or 24 LEDs for 100TX speed detection (steady green)
8, 16, or 24 LEDs for Link (steady green) / Activity (flashing green)
Stacking Cable: 50-pin shielded cable
Additional stacking: Up to a maximum of four (4) hubs
KND810TX KND1610TX KND2410TX
Uplink port:
Port 8 Port 8 Port 24
Connection Type: RJ-45, Female
Cable Type: UTP 26 to 22 AWG
Cable Grade:
10BASE-T
100BASE-TX
CAT3, 4, 5 or better
CAT5 or better
Max. Cable Length:
Repeater to node
Inter-repeater link
2 Class
II
Repeaters
100m (328ft)
5m (16.4ft)
Environmental:
Operating Temp. 0°C to 45°C (32°F to 113°F)
Storage Temp. -20°C to 60°C (-4°F to 140°F)
Relative Humidity 10% to 90% non-condensing
Electrical:
Input Voltage: 100VAC-240VAC, 50/60Hz, auto-sensing internal power supply
Output DC Voltage:
KND810TX / KND1610TX:
KND2410TX:
5 Vdc / 6A
5 Vdc / 11A
KND810TX KND1610TX KND2410TX
Power Consumption:
11.05 Watts max. 19.40 Watts max. 30.00 Watts max.
External Fuse: 250V / 2A maximum
Physical:
Dimension (HxWxD):
KND810TX / KND1610TX:
KND2410TX:
1.70” x 10.45” x 6.3” (43.2mm x 265.5mm x 160mm)
1.70” x 17.32” x 7.88” (43.2mm x 440.4mm x 200mm)
KND810TX KND1610TX KND2410TX
Weight:
3.4 lbs. (1.55 kg) 3.8 lbs. (1.73 kg) 6.2 lbs. (2.81 kg)
Certification:
EMI Standards: FCC Class A, CE CISPR A, C-Tick
EMC Standards: EN55022, IEC801-2, IEC801-3, IEC801-4
Low Voltage Directive: EN60950
Safety Standards: UL, cUL, TUV