Filter
Top Products
Appendix C Specifications 19
KNE24TX/RS User’s Guide - Rev. A01 Kingston Technology Company
100FX Modules:
with SC connectors
with ST connectors
Part Numbers:
KNE100FX/RSC
KNE100FX/RST
Specifications
Fast EtheRx Model: KNE24TX/RS
Compliance: IEEE 802.3u 100BASE-TX Standard for 100Mb/s
baseband networks
Media Interface: 24 UTP ports for 100BASE-TX connections
Diagnostic LEDs: 24 LEDs for Link (Green), Activity (flashing Green),
and
Partition (flashing Amber)
1 LED for Collision status (Amber)
1 LED for Power Indicator (Green)
5 LEDs for Utilization Status (steady green)
1 LED for Fiber Module Detection (steady green)
Uplink Port: Port 24 supports crossover and straight-thru cable
Connector Type: RJ-45, Female
Cable Type: UTP 26 to 22 AWG
Cable Grade: Category 5 or better
Stacking Cable: 50-pin shielded cable
Additional stacking: Up to 6 hubs maximum
Max. segment length: 100m (328 ft)
Inter-repeater link:
No. of repeaters:
Cable Length:
Two (2) Class II repeaters maximum
5 meters (16.4 feet)
Environmental:
Operating Temp. 0°C to 45°C (32°F to 113°F)
Storage Temp. -20°C to 60°C (-4°F to 140°F)
Relative Humidity 10% to 90% non-condensing
Electrical:
Input Voltage: 100VAC - 240VAC, 50/60Hz
Auto-sensing, internal power supply
Output Voltage: 5VDC / 8A
Power Consumption: 27W maximum
Physical:
Dimension
(H x L x D):
1.70” x 17.32” x 10”
(43.2mm x 440mm x 254mm)
Weight: 9.25 lbs. (4.2 kg)
Certification:
EMI Standards: FCC Class A, CE CISPR A, C-Tick
EMC Standards: EN55022, IEC801-2, IEC801-3, IEC801-4
Low Volt Directive: EN60950
Safety Standards: UL, cUL, TUV
Optional Accessories: