Kingston Technology KNE12TX/RS Switch User Manual


 
Appendix F Warranties and Notices 23
KNE24TX/RS User’s Guide - Rev. A01 Kingston Technology Company
Appendix E Mounting Templates
The Fast EtheRx hubs can be stationed on a flat surface using the four rubber
feet provided, or mounted to a standard 19-inch rack by using the mounting
brackets on each side of the unit.
Rubber Feet for Desktops
The Fast EtheRx hubs may use rubber feet applied to the bottom of the unit for
desktop surfaces or stacking hubs on top of one another. The four (4) rubber
feet have peel-off adhesive backing. Remove the backing and attach the feet to
the bottom of the hub.
Brackets for Rack Mounting
The Fast EtheRx hubs can also be mounted to a standard 19-inch rack by
attaching the angle brackets to each side of the hub. Align the holes in the
brackets with the side mount holes on the hub. Use the 8 bracket screws
provided to attach the brackets. When the hub is placed into a 19-inch rack, use
the 4 large knob rack-mount screws to secure the hub to the rack. See Figure E-
1 below:
Fig. E-1-Attaching the Mounting Brackets