Kodak 2500 Scanner User Manual


 
A-63055 December 1999 3
Memory
Requirements
The Scanner 1500 and the Scanner 2500 both have 8 MB of memory
already installed. This may be sufficient for your scanning needs.
Additional memory may be required, depending on the selected
resolution and paper size. You may add up to 64 MB more memory on
SIMM modules for a total of 72 MB. (Memory is available in 8, 16, or 32
MB modules. Obtain memory at a local retailer.) Up to two SIMM
modules can be installed for the required extended memory. Refer to
the scanner’s User’s Guide for information about installing memory.
The tables below and on the following page show how much memory
(in MB) you would need to add to scan a particular paper size at a
given resolution. (“0” means that no additional memory is required.)
Resolution A3 A4 A5 A6 B4 B5 B6 Ledger Legal Letter
100 dpi 0 0 0 0 0 0 0 0 0 0
200 dpi 0 0 0 0 0 0 0 0 0 0
300 dpi 16 8 0 0 8 0 0 16 8 8
400 dpi 24 8 0 0 16 8 0 24 16 8
500 dpi 40 16 8 0 32 16 8 40 24 16
Simplex Scanning
(8-bit)
600 dpi 64 32 16 8 48 24 8 64 40 32
Resolution A3 A4 A5 A6 B4 B5 B6 Ledger Legal Letter
100 dpi 0 0 0 0 0 0 0 0 0 0
200 dpi 0 0 0 0 0 0 0 0 0 0
300 dpi 8 0 0 0 0 0 0 8 0 0
400 dpi 8 0 0 0 8 0 0 8 8 0
500 dpi 16 8 0 0 16 8 0 16 8 8
Simplex Scanning
(4-bit)
600 dpi 32 16 8 0 24 8 0 32 16 16
Resolution A3 A4 A5 A6 B4 B5 B6 Ledger Legal Letter
100 dpi 0 0 0 0 0 0 0 0 0 0
200 dpi 0 0 0 0 0 0 0 0 0 0
300 dpi 0 0 0 0 0 0 0 0 0 0
400 dpi 0 0 0 0 0 0 0 0 0 0
500 dpi 0 0 0 0 0 0 0 0 0 0
Simplex Scanning
(Binary)
600 dpi 8 0 0 0 0 0 0 8 0 0