Kodak 9020 Projector User Manual


 
FAN, KEYBOARD PCB and TRAY MOTION PCB
1. Remove the UPPER HOUSING. See page 4-1.
2. Remove the CENTER HOUSING. See page 4-4.
3. Disconnect the FAN MOTORS.
4. Remove the FAN.
5. Disconnect the KEYBOARD PCB.
6. Disconnect the TRAY MOTION PCB.
NOTE:
Do not clean the FAN with compressed air because the rotary wings would be demaged!
FAN
figure 4-12
Service Manual SM2547-1
03/98 4-8 Kodak AG, Stuttgart