Filter
Top Products
4-6 A-61662 October 2011
Multifeed — when illuminated, indicates multiple or overlapped
documents have been detected entering the scanner. This indicator will
either momentarily light or remain lit depending on the multifeed
condition. For example:
• If the multifeed mode is set to Stop, the indicator remains lit and the
scanner stops when a multifeed is detected.
• If the multifeed mode is set to Notify, the indicator will light
momentarily along with a sound or prompt for each multifeed that is
detected while scanning.
MF Ignore (pre-emptive MF-ignore) — while scanning documents with
VRS or direct drivers the MF Ignore button allows you to override
multifeed detection to allow exception documents to pass through the
scanner without stopping the transport.
There are two options on the Configuration tab of the Advanced
Settings dialog box (accessed via the Settings button on the Home
screen). These options are:
• Ignore MF Alarm on the Next Page Only (default): if this option is
set, you can press the MF Ignore button once to ignore a multifeed
alarm on the next document entering the transport. If you press and
hold the MF Ignore button, any documents with a potential multifeed
condition will be ignored until the button is released.
• Ignore MF Alarm until Feeder Empties: if this option is set, you only
need to press the MF Ignore button once to ignore multifed
documents. There will be no MF alarms after this button is pressed
until the button is pressed again or the feeder is emptied of paper.
NOTE: MF Ignore when using VRS - Interactive Multifeed — the MF
Ignore button will allow you to keep the image of the multifed
page after it has been displayed on the screen.
For more information, see Chapter 5, Advanced Features.