Filter
Top Products
14 A-61602 January 2008
Turning on the scanner
and finalizing Kodak
Driver Software
installation
When the USB cable and power connections have been made, and the
Kodak Software Drivers have been properly installed, the installation
will be complete when the scanner is turned on.
1. Use the power switch on the back of the scanner to turn the scanner
on (I).
When you turn on the scanner, the green indicator will flash and the
scanner goes through a series of self tests. The following screens
may be displayed.
2. Click Next. The message Please wait while the wizard
searches.... will be displayed. When finished, the Hardware
Installation screen will be displayed.
3. Click Continue Anyway.