Filter
Top Products
A-61555 March 2007 3-23
Enabling/disabling image
addressing (for i1860
Scanner only)
An image address is a unique identifier assigned to each individual
document and may contain up to 30 characters (up to a maximum of 27
characters, plus 3 delimiters). An Image Address template is set up
using the TWAIN Data source or ISIS Driver. See the on-line help file
for more information on image addressing or the Image Processing
Guide PDF located on the installation CD. You can enable or disable
image addressing from the touchscreen.
IMPORTANT: If you change this setting, you will need to power
cycle the scanner.
1. From the Idle screen, select Settings to display the Settings screen.
2. Touch Image Address. The following screen will be displayed.