Filter
Top Products
A-61771 September 2012 5-9
Replacing the separation
roller or separation roller
tires
1. Open the scanner cover.
If you want to replace the separation roller, do Steps 2 and 3. If you want to
replace the separation roller tires, go to Step 4.
2. Remove the pre-separation pad and the separation roller.
3. Insert the new separation roller. Be sure to line up the slots on the
separation roller with the holders.
To replace the tires:
4. Replace each tire by sliding the tire off the core.
5. Install each new tire by gently pulling it over the core.
IMPORTANT: Do not overstretch the tire; it may tear.
6. Reinstall the separation roller. Be sure to line up the slots on the separation
roller with the holders.
7. Reinstall the pre-separation pad.
8. Close the scanner cover.