Filter
Top Products
Matchprint Professional Server for DocuColor 12 Printer/Copier – Quick Start
2002 Kodak Polychrome Graphics. All Rights Reserved.
7
Quick Start Steps
To quickly get your system set up for printing from the client, go through the
following procedures listed in the order shown:
Steps:
1. Start the Matchprint Professional Server software.
2. Printer Setup.
3. Printer Calibration.
4. Add a Spooler.
5. Add a Hot Folder.
6. Set Preferences.
7. Install PPDs.
8. Job Printing. You should now be able to successfully print from your client
application to the DocuColor 12.
Step 1. Starting the Software
1. Double-click the Matchprint Professional Server software icon.
2. The Matchprint Professional Server main application window appears.
Step 2. Printer Setup
The software is shipped to you with the Printer Settings already set. However, you
should confirm that the Media Settings (media type and size) for each tray match
what is in your DocuColor 12.
Note: If the printer is deleted, you will need to perform the following printer
setup instructions.
To add a printer or change printer settings, complete the following steps:
1. If you have had previous versions of the Matchprint Professional Server
on your system, delete previous printers prior to adding new ones. If the
system asks you if you want to delete previous files used only with this
printer, select Yes.
2. Go to Printer > Add Printer or select Xerox DocuColor 12 (or the name of
the printer you need to change). The Printer Settings window displays: