Filter
Top Products
4
7
Safety Precautions
Safety Precautions
For safety, before connecting the projector to the main,
ensure that the voltage selector is set to your main
voltage and the required fuse is fitted. An incorrectly
adjusted main voltage can damage the projector.
To prevent damage to equipment and operating personnel,
please observe the following precautions:
Insure that the voltage source contains a satisfactory path
to ground.
Do not operate where fluids could come into contact with
electrical components.
Maintain a six inch (15cm) air space around all sides of
equipment to allow proper ventilation.
Do not operate projector with a damaged cord or if the
projector has been dropped or damaged until it has been
examined by a qualified service technician.
Other than lamp changing, there are no user serviceable
components. Opening of the unit will expose dangerous
voltage levels and damage sensitive electronic
components.
All repairs should be performed by a qualified service
technician.
To protect unit from damaging condensation and thermal
shocks, these procedures should be followed:
1. In cold weather, always put the unit in moisture proof
container or enclosure before transporting.
2. Keep the unit warm while transporting or allow the
unit’s chassis to return to room temperature before
being turned on.
The goal is to prevent warm moist air from striking cold
electric and optical components and causing damaging
condensation.
Warning! Never operate a cold projector.