Filter
Top Products
Solving Problems with Media Misfeeds116
Media is
misfeeding.
Transparencies have
collected static elec-
tricity in the tray.
Remove the transparencies and load
them in Tray 1 one sheet at a time. Do
not fan transparencies before loading
them.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media.
See “Media Specifications” on page
52.
The media feed roller
is dirty.
Clean the media feed roller.
For more details, refer to “Interior” on
page 97.
Symptom Cause Solution